13,10

Plus 19% MwSt.
Delivery Time: immediately available

LiWa Flow®

LiWa Flow is a light-curing flowable resin for all wax works. LiWa Flow can be applied directly on the insulated master model. There is no need for duplicating LiWa Flow, this saves valuable time. The Material is delivered in ready-to-use syringes, which also makes the work easier.

The light-curing of LiWa Flow with UV-light only takes a short time. The exact period of the polymerization depends on various factors, like the light intensity or the colour of the employed gypsum. The procedure for finding out the correct duration of the light-curing is described in the instruction for use. LiWa Flow shows very little contraction.

The cured LiWa Flow modellations reproduce details very well. They are firm and flexible at the same time. The polymerized pieces can be easily removed from the model and very well grinded with rotating instruments, without warping or breaking.  This is due to the very high elastic recovery of the cured LiWa Flow modellations.

LiWa Flow burns out completely and without any residue. Like most resins, the material expands when heated, a fact that should be taken into account in the choice of the embedding material. Therefore, so called speed-embedding materials can only be used if the temperature can be increased gradually.

LiWa Flow is part of a wide range of materials: resins in different consistencies, preformed resin patterns, useful complementary materials for different areas of use as well as functional sets.

 

 


SKU WP-5140 Category


Share

Light-curing modelling material for all metal works (wax works): repairs, crowns, bridges, implant work. To insulate the model against LiWa Flow, one should use LiWa Iso.

  • Flowable consistency
  • Light-curing with UV-light
  • Moldability cold or hot
  • No duplication required
  • Burns out completely
  • Time-saving
  • Very little contraction
  • Cured pieces are firm and flexible at the same time
  • Very high elastic recovery

Physical properties:

Light-curing:                      15 sec. – 4 min. at 280 to 520 NM

Storage conditions:         dry and protected from light at 0 – 22 °C

Shelf life:                         3 years            

Presentation:

WP5140:                          LiWa Flow, flowable resin, 2 ml syringe

  1. Ist es für Geschiebearbeiten geeignet?
    Ja, es ist gut geeignet für Arbeiten mit Geschieben, da es fließfähig ist.
  2. Für welche Bereiche ist es noch geeignet?
    Besonders für Übergangsbereiche (Wachs/Gips) geeignet. Es bildet einen schönen und vor allem glatten Abschluss da es kalt aufgetragen wird.
Reviews

There are no reviews yet.

Be the first to review “LiWa Flow® fließfähiger, lichthärtender Kunststoff für Wachsarbeiten”

*